Do it yourself
Frequently asked questions about cars and motorcycles
Follow these step-by-step instructions to drain and refill the coolant or antifreeze in your BMW GS 310 motorcycle. First, place the motorcycle on its stand and start unscrewing the bleed screw located on the water pump casing, allowing the fluid to drain into a container for about ten minutes; then open the flap at the top to access the radiator, as shown in the video. Now, refill with the appropriate new coolant, pouring the correct amount; then start the engine!

Updated on 11 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Gs 310 Today, I will show you a really easy task that not everyone knows: the battery replacement, using a BMW GS 310 as an example. Let's get started! Inse…
Gs 310 In today's video tutorial, learn how to remove and replace the air filter on a BMW GS 310. First, remove the fuel tank by taking off the central seat…
Gs 310 To replace the rear brake pads on a BMW GS 310, loosen the screws that secure the rear brake caliper, allowing you to completely detach the caliper f…

Replacing the Headlight Bulb on the Yamaha Mio 125

This brief guide will show you how to remove and replace the headlight bulb on the Yamaha Mio 125 scooter in simple and quick steps. First, place the scooter on the centre stand and begin to remove the front headlight; to do this, unscrew the fastening screws located at the bottom and disconnect the electrical connector of the light found at the back, as illustrated in the video. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; finally, reassemble the front headlight with its front fairing!

Watch the video!


by ScegliAuto

More videos