Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a BMW S1000R?

Model: Bmw S1000r
Part: Engine oil

Video tutorial

To change the engine oil of a BMW S1000R, start by positioning the motorcycle on a flat surface and lifting it with a centre stand or suitable support. Ensure the engine is cold.

Remove the oil drain plug and unscrew the oil cap on the engine cover. Place a container under the drain plug to collect the used oil. Completely drain the used oil from the engine.

Ensure the drain plug is securely tightened. Slowly pour new oil into the oil filler using a funnel.

Consult the owner's manual for the correct oil specifications and the required quantity. Once the oil is added, securely close the oil cap on the engine cover.

Clean up any spills and check for leaks.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

How to Remove the Front Wheel of the BMW S1000R
How to Remove the Front Wheel of the BMW S1000R
S1000r In this brief and simple guide, learn how to remove and replace the front wheel and tyre of the BMW S1000R motorcycle by following the instructions b…
How to replace the clutch lever of the BMW S1000R
How to replace the clutch lever of the BMW S1000R
S1000r The instructions in this guide will show us how to disassemble and replace the clutch lever of the BMW S1000R, in simple steps. First, we put the mot…
How to Replace the Spark Plugs on a BMW S1000R
How to Replace the Spark Plugs on a BMW S1000R
S1000r This guide provides the main instructions on how to remove and replace the spark plugs on the BMW S1000R engine. First, place the bike on a stand and…

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos