Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the BMW R1150 GS

Model: Bmw R1100 Gs
Part: Battery

Video tutorial

Today's steps will guide you on how to remove and replace the battery of the BMW R1150 GS motorcycle, following the instructions below. First, place your motorcycle on a stand and begin by removing the rider's seat and the fuel tank, unscrewing all the fastening screws and also removing the fairings; you will find the battery under the tank, as shown in the video.

At this point, disconnect both battery terminals (positive and negative), remove it and replace it with a new one (with the same amperage); then reassemble all components!


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Change the Gearbox Oil on a BMW GS
How to Change the Gearbox Oil on a BMW GS
R1100 Gs To change the gearbox oil on a BMW GS, first, ensure the bike is stable and secure for working on. Start by removing the oil fill and drain plug usin…
Removing the Engine Oil Filter on a BMW R1100 GS
Removing the Engine Oil Filter on a BMW R1100 GS
R1100 Gs Remove the engine oil filter on a BMW R1100 GS. Position the motorcycle on a centre stand; remove the plastic filler cap and, using a spanner, unscre…
Changing the Oil and Air Filters on a BMW R1100 GS
Changing the Oil and Air Filters on a BMW R1100 GS
R1100 Gs To access and change the air filter, remove the seat by inserting the ignition key into the under-seat hole, then remove the clips and the cover of t…

How to replace the clutch lever on the Sherco SEF 300?

To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly.

Watch the video!


by ScegliAuto

More videos