Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw S1000 Rr
Part: Engine oil

To change the motor oil of a BMW S1000RR, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and put the motorcycle on a central or side stand to ensure stability. Locate the oil drain plug under the engine. Place a collection pan under the plug and unscrew it with a wrench, allowing the old oil to completely drain out. After the oil has been drained, screw the drain plug back in, making sure it is tight. Then, locate the oil fill cap, located on the top of the engine. Remove the cap and, using a funnel, slowly pour the recommended amount of new oil as indicated in the user manual. Once the oil is filled, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks.

Posted on 16 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil of a BMW S1000RR?
How to change the engine oil of a BMW S1000RR?
S1000 Rr To change the engine oil of a BMW S1000RR, start by ensuring that the engine is cold. Lift the motorcycle with a center or side stand to make it stab…
How to Change the Engine Oil in a BMW S1000RR?
How to Change the Engine Oil in a BMW S1000RR?
S1000 Rr In this tutorial, you will see how to change the engine oil in a BMW S1000RR, a very simple and quick operation. First, ensure that the engine is coo…
How to change the oil and oil filter of the BMW S1000RR
How to change the oil and oil filter of the BMW S1000RR
S1000 Rr This guide shows how to replace the engine oil of the BMW S1000RR. The first step is to start the motorcycle engine for a few minutes to make the lub…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos