Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the oil and oil filter of the BMW S1000RR

Model: Bmw S1000 Rr
Part: Engine oil

Video tutorial

This guide shows how to replace the engine oil of the BMW S1000RR. The first step is to start the motorcycle engine for a few minutes to make the lubricant less viscous. To make the oil change procedure more effective, it is advisable to add a cleaning additive to the oil in the tank; restart the engine for a few minutes to ensure the fluid circulates well.

At this point, you can remove the left engine cover to access the parts that need maintenance. After placing a container to properly dispose of the used oil, unscrew the drain plug located at the bottom of the engine; wait for all the fluid to drain, then unscrew the oil filter and replace it with a new one, remembering to lubricate the seal.

Refit the drain plug and clean any oil residue. Fill the tank with the new oil and start the engine for a few minutes.

Check the fluid level before hitting the road.


Updated on 18 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a BMW S1000RR?
How to Change the Engine Oil in a BMW S1000RR?
S1000 Rr In this tutorial, you will see how to change the engine oil in a BMW S1000RR, a very simple and quick operation. First, ensure that the engine is coo…
How to change the engine oil of a BMW S1000RR?
How to change the engine oil of a BMW S1000RR?
S1000 Rr To change the engine oil of a BMW S1000RR, start by ensuring that the engine is cold. Lift the motorcycle with a center or side stand to make it stab…
How to Change the Engine Oil on a BMW S1000RR
How to Change the Engine Oil on a BMW S1000RR
S1000 Rr To change the engine oil on a BMW S1000RR, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place…

How to Replace the Air Filter on the Kawasaki Ninja 1000 SX?

In this tutorial, you will see how to replace the air filter on the Kawasaki Ninja 1000 SX, a very simple and quick operation. First, remove the seat, then take off both side panels by unscrewing the respective screws and unscrew the two bolts located at the front of the fuel tank. Next, lift the tank, support it with a rope if necessary, and remove the top cover of the airbox. At this point, extract the old filter, clean the inside of the housing from any dirt residue, and fit the new part by reversing the procedure.

Watch the video!


by ScegliAuto

More videos