Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a BMW Z3

Model: BMW Z3 MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Service warning light

Video tutorial

Today, you will learn how to reset the service light for a 2001 BMW Z3 without going to a garage and in the shortest time possible. To reset the service light on the 2001 BMW Z3, you need to: - switch off the instrument cluster; - open the bonnet; - place the oil reset cable on the nut, as shown in the video; - wait 10 seconds before moving the cable; - switch on the instrument cluster to complete the oil light reset; If the light does not reset, you must visit a garage for a diagnostic check to resolve the issue.


Updated on 6 November 2026 by ScegliAuto


Related tutorials

Where is the fuse box of the BMW Z3 located?
Where is the fuse box of the BMW Z3 located?
BMW Z3 (1995-2002 / MK 1) If you still don't know where the box containing all the various fuses of your BMW Z3 is located, don't worry because the following guide will help y…
Where is the fuse box of the BMW Z3 E36 located?
BMW Z3 (1995-2002 / MK 1) If you own a BMW Z3 e36 and want to find out where the fuse box is located, all you have to do is read the following guide carefully and follow the p…
Where are the Fuses Located in a BMW Z3?
BMW Z3 (1995-2002 / MK 1) The fuses in a BMW Z3 are divided between two fuse boxes installed in the car: in this model, one box can be found in the engine compartment and one …

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos