Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear windshield wiper of the BMW 1 Series F40

Model: BMW Serie 1 MK 3, F40 - Years 2019-2026
Part: Windshield wipers

Replacing the rear windshield wiper of your BMW 1 series f40 is really very simple and by following the procedure described in our new guide, you will be able to complete the operation without any difficulty. First of all, make sure you have a new wiper blade that is perfectly compatible, then reach the rear area of the car and remove the broken wiper blade by acting on the appropriate safety hook. Once removed, install the new wiper blade and bring it back to its original position. Finally, get into the car and test its correct operation.

Posted on 13 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front and Rear Wipers on a BMW 1 Series?
How to Replace the Front and Rear Wipers on a BMW 1 Series?
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) In this guide, we will outline the steps to remove and replace the front and rear wipers on a BMW 1 Series. First, move to the front of the vehicle a…
Removing the Rear Wiper Motor on a BMW 1 Series
Removing the Rear Wiper Motor on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) This guide shows how to replace the rear wiper motor on a BMW 1 Series. Unscrew the fastening nut of the wiper arm; remove it from the tailgate. Lift…
Replacement of the rear windshield wiper motor of the BMW 1 Series
Replacement of the rear windshield wiper motor of the BMW 1 Series
BMW Serie 1 (2004-2013 / E81, E82, MK 1, E87) Today's steps will show us how to disassemble and replace the rear windshield wiper motor of the BMW 1 Series. First, we open the rear trunk door and…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos