Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Wiper Motor on a BMW 1 Series

Model: BMW Serie 1 E81, E82, MK 1, E87 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

See other generations:
Video tutorial

Today’s steps will show you how to disassemble and replace the rear wiper motor on a BMW 1 Series. First, open the rear hatch of the boot and start by removing the plastic panel of the hatch, unscrewing the fixing screws found on the sides; then unscrew the screws of the rear wiper motor, disconnecting the electrical connector to remove it, as shown in the video.

At this point, install the new wiper motor and finally reassemble the plastic panel of the hatch!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

Removing the Rear Wiper Motor on a BMW 1 Series
Removing the Rear Wiper Motor on a BMW 1 Series
BMW Serie 1 (2011-2019 / F21, MK 2, F20) This guide shows how to replace the rear wiper motor on a BMW 1 Series. Unscrew the fastening nut of the wiper arm; remove it from the tailgate. Lift…
How to Replace the Rear Light on a BMW 1 Series?
How to Replace the Rear Light on a BMW 1 Series?
BMW Serie 1 (2011-2019 / F21, MK 2, F20) To replace the rear light on a BMW 1 Series, start by opening the tailgate and removing the interior trim covering the rear of the bodywork. Locate t…
Removing the Rear Light on a BMW 1 Series F20
Removing the Rear Light on a BMW 1 Series F20
BMW Serie 1 (2011-2019 / F21, MK 2, F20) In this video tutorial, you will see how to remove the rear light and replace the bulbs on a BMW 1 Series F20. First, open the boot of your vehicle a…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos