Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Light on a BMW 1 Series F20

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Tail light

In this video tutorial, you will see how to remove the rear light and replace the bulbs on a BMW 1 Series F20. First, open the boot of your vehicle and unclip the light by prying on the side tabs, using something thin; then, unscrew the fixing nuts found underneath, as illustrated in the video. At this point, remove the light and disconnect the electrical connector of the bulbs; proceed to remove the bulb holder to access the bulbs and, if necessary, replace them!

Updated on 9 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Rear Light on the BMW 1 Series
Removing the Rear Light on the BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In today's tutorial video, you will see the steps to remove and replace the rear light on the BMW 1 Series, following the instructions below. First, …
Removing the Rear Light and Bulb on a BMW 1 Series
Removing the Rear Light and Bulb on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Today, you will learn how to remove the rear light and replace its bulbs on a BMW 1 Series F20. First, open the boot lid. Then, use a socket wrench t…
How to Replace the External Wing Mirror on a BMW 1 Series F20
How to Replace the External Wing Mirror on a BMW 1 Series F20
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video, discover the procedure for removing and replacing the external wing mirror on a BMW 1 Series F20, as well as on the 2 Series. First, o…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos