Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Rear Light on the BMW 1 Series

Model: BMW Serie 1 MK 2, F20, F21 - Years 2011-2019
Part: Tail light

In today's tutorial video, you will see the steps to remove and replace the rear light on the BMW 1 Series, following the instructions below. First, open the boot lid and start by removing the small plastic cover on the side of the light. Then, use a socket spanner to unscrew the two screws, gently removing the light from the bodywork, as illustrated in the video. At this point, disconnect the bulb connector to remove it and replace it with the new one; then reassemble everything!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 1 (2011-2019 / MK 2, F20, F21) To replace the rear light of a BMW 1 Series, start by opening the rear hatch and removing the inner lining that covers the back of the body. Locate t…
BMW Serie 1 (2011-2019 / MK 2, F20, F21) Are the bulbs in the rear light of your BMW 1 Series no longer working? Let's see in this video how to replace the damaged bulbs. Open the boot lid, …
BMW Serie 1 (2011-2019 / MK 2, F20, F21) In this video tutorial, you will see how to remove the rear light and replace the bulbs on a BMW 1 Series F20. First, open the boot of your vehicle a…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos