Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the door panel of the BMW F10?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Door trim panel

In order to remove the door panel of the BMW F10, you need to pry it with an object so that you can detach the trim located at the top of the panel. Once this trim is removed, you can proceed by detaching the one on the door handle and loosening the screws located under both trims. The window switch button must be removed from its housing by disconnecting the connector and detaching the panel. At this point, you can proceed to connect the new panel, so that it can be fixed with the appropriate screws.

Posted on 17 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the driver side door handle of the BMW 5 Series
How to replace the driver side door handle of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today we will explain how to replace the driver side door handle on a BMW 5 Series F10 model. Before proceeding with the handle replacement, we need …
Where to Find the OBD Port on a BMW 5 Series F10
Where to Find the OBD Port on a BMW 5 Series F10
BMW Serie 5 (2010-2017 / F11, F10) To locate the OBD port on your BMW 5 Series F10, follow the steps outlined in this guide. First, open the driver's door, then enter the vehicle and l…
How to remove the rear door panel of the BMW 5 Series
How to remove the rear door panel of the BMW 5 Series
BMW Serie 5 (2010-2017 / F11, F10) Today we will see the process of disassembling the rear door panel of the BMW 5 Series. First, we open the rear door of the car and start by removing…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos