Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the passenger door panel in the BMW X3?

Model: BMW X3 MK 2, F25 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Door trim panel

See other generations:
Video tutorial

In this tutorial we can see how to disassemble the passenger door panel in the BMW X3, an extremely simple and quick operation. First of all, we open the door in question, then, using a preferably plastic spatula to avoid leaving marks, we unclip both the handle cover and the lock switch panel.

We then unscrew all the fixing bolts with a Torx T20 key, lever along the perimeter of the panel and separate it from the door. At this point, all that remains is to disconnect the various connectors and install the replacement if necessary.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

Remove the Door Panel on BMW X3
Remove the Door Panel on BMW X3
BMW X3 (2003-2010 / E83, MK 1) Is the door panel (driver side) on your BMW X3 damaged? Here’s how to replace it. Use a screwdriver to remove the plastic screw covers from the panel…
How to Remove the Door Panel of the BMW X3
How to Remove the Door Panel of the BMW X3
BMW X3 (2003-2010 / E83, MK 1) Follow these instructions to remove and replace the front door panel of the BMW X3. First, open the front door of your car and start removing the pla…
Remove the Door Panel of the BMW X3
Remove the Door Panel of the BMW X3
BMW X3 (2003-2010 / E83, MK 1) How to remove the rear door panel of the BMW X3? Let's see how to take it off the door. Use a trim tool to pry up the plastic covering of the handle …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos