Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Speakers

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Speaker

See other generations:
Video tutorial

Start by removing the cover above the armrest to access the screw, then unscrew the screws located under the armrest. Using a plastic spatula, gently remove the panel under the glass at the handle height to access the underlying screws that need to be removed.

Also, use the plastic spatula to pry along the edges of the panel, which should be carefully pulled upward. Disconnect the electrical contacts by unplugging the connectors, being careful not to pull them and the mechanical lever.

Remove the speaker bracket and take it out. Remove the woofer speaker from the bracket by taking out the three screws and install the new one. Repeat the same operation with the tweeter speaker, paying attention to the mounting reference. Reassemble the new panel starting with the connection of the electrical wires.

Position the panel upward and then push it down until it clicks into place. Reinsert the screws.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Replacing Door Speakers in BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Are the speakers in your BMW 3 Series damaged? Let's see how to remove them. You need to take off the door panel to access the speaker. Use a trim to…
Replacing the Speakers in the BMW 3 Series
Replacing the Speakers in the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This guide will show you how to remove and replace all the speakers in the BMW 3 Series, following the instructions below. First, get inside the vehi…
How to replace the front speakers in the BMW 3 Series?
How to replace the front speakers in the BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) In this tutorial, you will see how to replace the front speakers in the BMW 3 Series, a very simple and quick operation. First, make sure the key is …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos