Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a BMW Z3

Model: BMW Z3 MK 1 - Years 1995-2002
Part: Door trim panel

Remove the front left door panel on a BMW Z3. Use a screwdriver to remove the trim around the upper door handle. Take out the switch panel from the door panel (disconnect the connector), unscrew the remaining screws on the door panel, and detach the retaining clips. Finally, pull the panel away by hand and disconnect it from the door (disconnect the power wiring and the opening cable if present on the model). Perform the desired maintenance inside the door. Refit the panel after maintenance.

Updated on 14 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Removal of the Left Front Door Panel of a BMW Z3
Removal of the Left Front Door Panel of a BMW Z3
BMW Z3 (1995-2002 / MK 1) Remove the left front door panel of a BMW Z3. Disconnect the battery terminals located in the engine compartment, and using a lever, detach the trim …
Disassembly of the front door panel of the BMW Z3.
Disassembly of the front door panel of the BMW Z3.
BMW Z3 (1995-2002 / MK 1) These brief instructions will guide us through the process of disassembling and replacing the front door panel of the BMW Z3. First, we open the fron…
How to Remove the External Wing Mirror from a BMW Z3
How to Remove the External Wing Mirror from a BMW Z3
BMW Z3 (1995-2002 / MK 1) Before you can start, open the front door of your BMW Z3. Begin by removing the door panel, unscrewing the fixing screws and releasing the internal c…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos