Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Diesel Filter from a BMW X6

Model: BMW X6 MK 1, E71 - Years 2007-2014
Part: Diesel fuel filter

Remove the used diesel filter from a BMW X6. Lift the vehicle on a column lift. Remove the plastic cover that conceals the filter. Locate the filter, and with a socket wrench, unscrew the fastening bolts near the filter (disconnect the wires and various hoses from the filter) where the diesel filter is located. Once the filter is removed, take it out of the vehicle. Clean the filter housing thoroughly, install the new filter (connect the hoses and wires), and tighten the appropriate bolts. Reinstall the plastic covers under the vehicle.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the BMW X6 F16
How to replace the cabin air filter of the BMW X6 F16
BMW X6 (2014-2019 / MK 2, F16) If the cabin air filter in your BMW X6 f16 (year 2014-2019) is excessively worn and you want to learn how to replace it quickly and safely, then you …
Where to Find the Cabin Air Filter on the BMW X6
Where to Find the Cabin Air Filter on the BMW X6
BMW X6 (2014-2019 / MK 2, F16) The cabin air filter on the BMW X6 is located in a standard position for many BMW models, but access may vary depending on the production year. For t…
Replacing the Cabin Air Filter on BMW X6
Replacing the Cabin Air Filter on BMW X6
BMW X6 (2007-2014 / MK 1, E71) Pull the lever and lift the hood, ensuring it stays in position. The cabin air filter, or pollen filter, is located near the windshield on the passen…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos