Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Angel Eyes Front Bulbs

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Headlight

To replace the LED or Xenon bulbs in the ANGEL EYES headlights, you must completely remove the front light assembly. Unscrew the retaining screws and gently pull it out from its housing, disconnecting the electrical connector. Place the assembly on a support and remove the bulb holder for the high beam light. Do not touch the glass bulb with your hands. Next, remove the Angel Eyes headlight bulb and disconnect the electrical contacts, which you will reattach to the new bulb. Reinstall the two bulb holders in their respective positions and reposition the headlight assembly in its housing, connecting the corresponding connector. Screw in the retaining screws.

Updated on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Angel Eyes Front Bulbs and Removing Headlight
BMW Serie 5 (2003-2010 / E61, E60) To replace the LED or Xenon bulbs in the ANGEL EYES headlights, you must completely remove the front light assembly. Unscrew the retaining screws and…
Replacing the Headlight Bulb in ANGEL EYES
Replacing the Headlight Bulb in ANGEL EYES
BMW Serie 5 (2003-2010 / E61, E60) To replace the LED or Xenon bulbs in ANGEL EYES headlights, completely remove the front light assembly. Unscrew the retaining screws of the assembly …
Connect "Angel Eyes" Lights to Door Lock with Remote
Connect "Angel Eyes" Lights to Door Lock with Remote
BMW Serie 5 (1995-2003 / E39) As you may remember, in the previous video, I showed you the installation of the "angel eyes" lights and the entire process, including the cable rout…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos