Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : ANGEL EYES headlight bulb replacement

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E61, E60 - Years 2003-2010
Part: Light bulb
Operation: ANGEL EYES headlight bulb replacement

To replace the LED or Xenon bulbs in the ANGEL EYES headlights it is necessary to completely disassemble the front light assembly. Unscrew the screws holding the unit and gently slide it out of its seat by removing the connector of the electric cables. Place the assembly on a stand and remove the bulb holder for the main beam. Never touch the glass bulb with your hands. Then extract the angel eyes headlight lamp and remove the electrical contacts that you will reassemble in the new lamp. Refit the two bulb holders in their respective seats and reposition the headlight unit in its housing by connecting the relative connector. Screw in the set screws


Posted on 24 June 2023 by ScegliAuto



Angel Eyes front bulbs replacement and headlight removal
BMW Serie 5 (2003-2010 / E61, E60) To replace the LED or Xenon bulbs in the ANGEL EYES headlights it is necessary to completely disassemble the front light assembly. Unscrew the screws
Angel Eyes front bulbs replacement
BMW Serie 5 (1995-2003 / E39) To replace the LED or Xenon bulbs in the ANGEL EYES headlights it is necessary to completely disassemble the front light assembly. Unscrew the screws
Connection of "angel eyes" lights to the door closure with remote control
BMW Serie 5 (1995-2003 / E39) If you remember, in the previous video I showed you the installation of the "angel eyes" type lights and then all the way, the cable passages useful

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos