Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 5
  6. : How to install or replace the welcome light on BMW 3 Series - 4 Series - 5 Series

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F10, F11 - Years 2010-2017
Part: Light bulb
Operation: How to install or replace the welcome light on BMW 3 Series - 4 Series - 5 Series

In this video tutorial we will see how to install or replace the welcome light bulb found on the door on a BMW 5 Series, but also on the 3 Series and 4 Series. First we open the door and locate the welcome light bulb; it is found on the lower part of the door, as shown in the video. At this point we use a very thin plastic lever to be able to release it; then we disconnect the electrical connector to replace it with the one with logo projection light. If the projection system is already present then we will proceed with the replacement of the lamp only!


Posted on 25 January 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos