Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Door of a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Car door

See other generations:
Video tutorial

In this guide, you will learn how to remove the front door of a BMW 3 Series in simple steps. First, open the door and grab a 10 mm socket wrench: then, unscrew the bolt of the door handle.

Next, unscrew the two nuts of the door hinge. Now, lift the door slightly and pull it out, as shown in the video; finally, disconnect the electrical wires located inside the sheath: to disconnect them, unscrew the fastening screws with a socket wrench and then unplug the electrical connector!


Updated on 10 April 2026 by ScegliAuto


Related tutorials

How to disassemble the front door of the BMW 3 Series
How to disassemble the front door of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today's guide will show us the process of disassembling the front door of the BMW 3 Series, in simple steps. First, we open the front door of the car…
Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
Removing the Door Panel of the BMW 3 Series
Removing the Door Panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's instructions will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, get inside the vehicle a…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos