Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel of the BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Today's instructions will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, get inside the vehicle and start by removing the plastic cover of the door handle and the window switch panel.

Pry it off from the sides and disconnect the electrical connector located underneath. Then, remove the screws securing the panel, as shown in the video.

At this point, remove and replace the door panel if necessary, allowing access to the interior of the door. Finally, reassemble everything!


Updated on 22 October 2026 by ScegliAuto


Related tutorials

Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…
How to Remove the Door Panel of a BMW 3 Series
How to Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, open the front door of your BMW 3 Series. Begin by prying and removing the center insert of the door panel using a thin but stu…
Remove the Door Panel of a BMW 3 Series
Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Remove the door panel of a BMW 3 Series (left rear side). Disconnect the battery terminals located in the engine compartment. Using a screwdriver, re…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos