Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Door Panel of a BMW 3 Series

Model: BMW Serie 3 F31, F30 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Remove the door panel of a BMW 3 Series (left rear side). Disconnect the battery terminals located in the engine compartment.

Using a screwdriver, remove the screws in the handle area (after removing the plastic cover), remove the remaining screws from the door panel, and detach the retaining clips. Finally, pull off the panel and disconnect it from the door (unplug the power wiring and the release cable).

Perform the desired maintenance inside the door and then reinstall a new panel or the original one.


Updated on 7 March 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a BMW 3 Series
How to Remove the Door Panel of a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Before you can start, open the front door of your BMW 3 Series. Begin by prying and removing the center insert of the door panel using a thin but stu…
Removing the Door Panel of the BMW 3 Series
Removing the Door Panel of the BMW 3 Series
BMW Serie 3 (2012-2019 / F31, F30) Today's instructions will show you the procedure for removing and replacing the front door panel of the BMW 3 Series. First, get inside the vehicle a…
Disassembly of the front door panel of the BMW 3 Series.
Disassembly of the front door panel of the BMW 3 Series.
BMW Serie 3 (2012-2019 / F31, F30) In a few simple steps, we will see the process of disassembling the front door panel of the BMW 3 Series. First, we open the front door of the car an…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos