Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the front door of the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Car door

Today's guide will show us the process of disassembling the front door of the BMW 3 Series, in simple steps. First, we open the front door of the car and start unscrewing all the hinge fixing screws, keeping the door lifted from the bottom; then we disconnect the flexible tubing and also the electrical wiring, as shown in the video. At this point, we remove the entire front door, replacing it if necessary with a new one; we reassemble the front door and adjust it correctly, checking the opening and closing.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the interior handle (right front) on a BMW 3 Series: disconnect the battery terminals, use a screwdriver to remove the screws located in the u…
BMW Serie 3 (2019-2026 / G20) Today, you will learn in this brief and simple guide how to remove and replace the front door panel of the BMW 3 Series. First, open the front door a…
BMW Serie 3 (1998-2006 / E46) To remove the outer door handle of the BMW 3 Series, open the door and move the side seal to access the circular cap near the handle. By removing thi…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos