Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. BMW
  4. :
  5. Serie 3
  6. : Disassembly of the ignition button BMW Serie 3 E92

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E92, E91, E90 - Years 2005-2013
Part: Push button
Operation: Disassembly of the ignition button BMW Serie 3 E92

In this video tutorial we will see how to remove the ignition button of the engine of a BMW 3 Series E92. First we get on board the car and we go to remove the plastic bulkhead that we find centrally on our dashboard; once removed we go to disconnect the electrical connector that we find on the central part and the one that we find on the back of the button itself. At this point we are going to release the button from the bulkhead, by pressing and making it come out from the outside, as shown in the video. We just have to replace it with the new one and reassemble everything!


Posted on 12 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos