Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing a radiator for a BMW 3 Series

Model: BMW Serie 3 E90, E92, E91 - Years 2005-2013
Part: Radiator

How to remove the radiator of the BMW 3? We lift the bonnet and identify all the pieces to be disassembled to get to the cooling radiator. We disassemble the various air pipes and plastic covers to access all the fastening screws of the radiator. We unscrew the clamping screws above the plates that block the radiator at the top, then lift the car onto a column bridge and loosen the clamp of the water hose. We detach the various convoy sleeves of the refrigeration system with pliers, remove the fan kit. We pull out the radiator from the bottom of the vehicle.

Posted on 9 July 2021 by ScegliAuto

Video tutorial

Related tutorials

BMW 3 Series E36 thermostatic valve replacement
BMW 3 Series E36 thermostatic valve replacement
BMW Serie 3 (1990-2001 / E36) In this video we will see how to change the delicate thermostatic valve of the BMW 3 Series E36. Let's go to disassemble the air filter and the mass …
How to remove the cooling radiator on BMW 3 Series E90
How to remove the cooling radiator on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E90, E92, E91) Let's see the practical instructions to be able to disassemble and replace the cooling radiator on a BMW 3 Series E90, third series. First of all we …
How to disassemble the radiator sleeve of a BMW 3 Series?
How to disassemble the radiator sleeve of a BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) Good morning, today we are here to disassemble the radiator hose of our BMW 3 Series. We start by opening the front engine hood. Then, we will need t…

Other guides you may be interested in

How to Remove the Original Radio on a Honda CR-V

How do you remove the original radio on a Honda CR-V? First, use a plastic lever to remove the side cover of the radio (the air vents), then, with a screwdriver, unscrew the securing screws located on the sides (if present). After unscrewing the side screws (and disconnecting the clips) of the stereo, pull it out from its slot and remove it (disconnect the various power connectors at the back). To install the new stereo and the various removed parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos