Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cooling Radiator on BMW 3 Series E90

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Radiator

Follow these practical instructions to remove and replace the cooling radiator on a BMW 3 Series E90, third generation. First, lift the hood of your car and remove the front cover located above the bumper by unscrewing the mounting screws. Then, disconnect the intake hose from the air filter box and unplug the various sensors, as shown in the video. Next, take a T25 Torx wrench to unscrew the bolts of the radiator hoses; also unscrew the lower screws of the fan to remove it from the top. Finally, remove and replace the radiator!

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Radiator from the BMW 3 Series
How to Remove the Radiator from the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, let's go over the instructions to remove and replace the engine cooling radiator on the BMW 3 Series. First, open the hood of the vehicle and …
How to Bleed the Cooling System on BMW 3 Series E90
How to Bleed the Cooling System on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will learn how to bleed and replace the coolant or antifreeze on the BMW 3 Series E90 by following these simple steps. Fi…
How to Remove the Radiator from a BMW 3 Series
How to Remove the Radiator from a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the cooling radiator from a BMW 3 Series. Open the hood, and using a suitable socket wrench, detach the plastic parts at the top. Then …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos