Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radiator from the BMW 3 Series

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Radiator

See other generations:
Video tutorial

Today, let's go over the instructions to remove and replace the engine cooling radiator on the BMW 3 Series. First, open the hood of the vehicle and begin by removing the radiator fan, unscrewing the mounting screws and disconnecting the electrical connector.

Disconnect the radiator hose, allowing the fluid to drain into a container, as shown in the video. Now, remove the lower engine cover to access the radiator, disconnecting all hoses and removing it from the engine bay. Then, install the new radiator!


Updated on 20 September 2026 by ScegliAuto


Related tutorials

How to Replace the Heater Core in a BMW 3 Series
How to Replace the Heater Core in a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Discover the main steps to remove and replace the heater core in the BMW 3 Series cabin by following the instructions below. First, get inside the ve…
How to Replace the Cabin Heater Radiator in a BMW 3 Series
How to Replace the Cabin Heater Radiator in a BMW 3 Series
BMW Serie 3 (1990-2001 / E36) Below are the instructions to remove and replace the cabin heater radiator in a BMW 3 Series. First, open the hood of your car and start disconnectin…
Replacing a Radiator for a BMW 3 Series
Replacing a Radiator for a BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) .. How to remove the radiator from the BMW 3 Series? Lift the hood and locate all the components to remove.. …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos