Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to top up the radiator coolant of the BMW X3

Model: BMW X3 F25, MK 2 - Years 2010-2017
Part: Radiator

The guide shows how to top up the coolant of the BMW X3. The first step consists in securing the car and letting the engine cool down. Open the hood and identified the radiator cap, which is located in the initial part of the compartment. Pay attention when opening because of possible steam escapes created inside. At this point it is possible to fill up to the level indicated in the liquid user manual. Close the radiator tank cap again and tighten it correctly. At this point, any warning light, present on the instrument panel and stylized by a half-full tank, has gone out.

Posted on 16 September 2021 by ScegliAuto

Video tutorial

Related tutorials

How to top up the coolant in the BMW X3?
How to top up the coolant in the BMW X3?
BMW X3 (2017-2024 / G01, MK 3) In this tutorial, we can see how to top up the coolant in the BMW X3, an extremely simple and quick operation. Before proceeding, we wait for the eng…
What does the radiator warning light on the BMW X3 mean?
What does the radiator warning light on the BMW X3 mean?
BMW X3 (2003-2010 / MK 1, E83) When the yellow warning light of the radiator tank lights up on the display of the BMW X3, it means that the latter has problems: these can be relate…
How to top up the coolant in a BMW X3?
How to top up the coolant in a BMW X3?
BMW X3 (2010-2017 / F25, MK 2) To top up the coolant of your BMW X3, follow these steps. Make sure the engine is cool before starting. Open the hood and locate the coolant tank. Ch…

Other guides you may be interested in

How to Remove the Bonnet on a Smart Fortwo

To open the front bumper of the Smart Fortwo for bulb maintenance, follow these steps: open the plastic levers located at the sides of the front grille with your hands. Once the front plastic is free, lift it upwards with your hands, then remove it from the bodywork as shown in the video. After removing the mentioned piece, replace the damaged bulbs. To reassemble, secure the plastic cover at the front of the car and then at the bottom. Finally, close the bonnet release levers with your hands.

Watch the video!


by ScegliAuto

More videos