Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Disassembly of the interior of the trunk on the BMW 3 Series F30

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Door panel
Operation: Disassembly of the interior of the trunk on the BMW 3 Series F30

In this video tutorial we will see how to remove the panel and the interior of the trunk on the BMW 3 Series F30, but also on the F31, following these simple steps. First of all, we open the tailgate and start by removing the floor panel; then we remove the fixing clips and pull the lever to recline the backrests, as shown in the video. At this point we are going to remove the plastic cover and all the object holders that we find on the trunk; then we unscrew the fixing screws with a torx T25 screwdriver and remove the 12V socket. Follow the video to the end for complete disassembly!


Posted on 29 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - How to remove the door panel on the BMW 3 Series? Read Answer
    • Serie 3 1998-2006 - How to remove the door panel in the BMW 3 Series? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos