Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear light of the BMW X1

Model: BMW X1 E84 - Years 2009-2015
Part: Tail light

The guide shows how to remove the rear light of the BMW X1. To complete this operation it is necessary to open the luggage compartment and remove the trim panel on the side of the light to be removed. At this point, with a wrench it is possible to unscrew the three small fixing bolts of the nacelle. From the outside of the vehicle it is possible to remove the assembly, taking care not to pull too much. Disconnect the electric cable before completing the disassembly operation. Reassembly is carried out in the same way but following the steps in reverse. Once the light has been reassembled, check that it works correctly before taking the road.

Posted on 12 October 2021 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the rear light on the BMW X1?
How do you replace the rear light on the BMW X1?
BMW X1 (2015-2022 / F48) How do you replace the rear light on the BMW X1? First lift the tailgate of the rear trunk. Position yourself on the side, next to the lighthouse, an…
How do you install the longitudinal bars on the BMW X1?
BMW X1 (2015-2022 / F48) In order to install the longitudinal bars of the BMW X1 it is necessary to access the interior of the passenger compartment, so that all the componen…
How to replace the remote control battery of the BMW X1 E84
How to replace the remote control battery of the BMW X1 E84
BMW X1 (2009-2015 / E84) The guide shows you how to replace the remote control battery of the BMW X1 E84. If the remote control has a small flap on the back near the battery,…

How to Replace the External Wing Mirror of a Ford Fiesta

To access the bolts securing the mirror, you will need to remove the triangular panel located on the inside of the door at the height of the external mirror. Then, disconnect the connector that powers the mirror motor and proceed to remove the bolts. This way, you can extract the mirror, which is still held by movable clips, to carry out the necessary work and proceed with the reassembly of the various components simply by retracing the steps described in reverse, and you're done!

Watch the video!


by ScegliAuto

More videos