Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dome Light Bulb on BMW 3 Series F30

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Interior dome light bulb

Pull the dome light down from the front without losing the mounting clips. If you have difficulty removing it by hand, use a plastic wedge for assistance. Once done, disconnect the connector and completely remove the dome light. At this point, unscrew the dome light from the usually hidden side with a screwdriver, as shown in the video. Now you can remove the bulb and replace it with an equivalent one you purchased. Proceed in reverse order until fully reassembled. This is a fairly simple task.

Updated on 27 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulb and Dome Light of the BMW 3 Series
Replacing the Bulb and Dome Light of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) This guide will show you how to remove and replace the bulb and dome light of the interior lights in the BMW 3 Series. First, get inside the vehicle …
How to Replace the Cabin Light Bulb on the BMW 3 Series
How to Replace the Cabin Light Bulb on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will learn how to replace the cabin light bulb in the overhead console of a BMW 3 Series vehicle. To perform the bulb replacement, get ins…
How to replace the bulb of the ceiling light in the BMW 3 Series?
How to replace the bulb of the ceiling light in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial we can see how to replace the bulb of the ceiling light in the BMW 3 Series, an extremely simple and quick operation. First of all, …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos