Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Light Bulb on the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Interior dome light bulb

Today, you will learn how to replace the cabin light bulb in the overhead console of a BMW 3 Series vehicle. To perform the bulb replacement, get inside the vehicle and use a flathead screwdriver to remove the overhead console from the roof. After removing the console, disconnect the connector from the bulb to replace it. If there is a retaining screw, you will need to unscrew it with a Torx screwdriver. After replacing the bulb, reconnect the connector and reinstall the overhead console on the roof. Turn on the lights to test their functionality; if they do not work, you may need to replace the corresponding fuse.

Posted on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Bulb and Dome Light of the BMW 3 Series
Replacing the Bulb and Dome Light of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) This guide will show you how to remove and replace the bulb and dome light of the interior lights in the BMW 3 Series. First, get inside the vehicle …
Replacing Cabin Lights on BMW 3 Series
Replacing Cabin Lights on BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Start by removing the overhead light fixture located in the ceiling of the car: for this task, strongly avoid using large metal wedges as you risk da…
How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
How to Replace the Angle Eyes Position Light Bulbs on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E91, E90, E92) Replacing the angle eyes position light bulbs on a BMW 3 Series E90 is very simple. Follow these steps in this tutorial. First, lift the car with a j…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos