Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the bulb of the ceiling light in the BMW 3 Series?

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Interior dome light bulb

In this tutorial we can see how to replace the bulb of the ceiling light in the BMW 3 Series, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can work safely, then go inside the vehicle, grab the glass of the ceiling light from the front edge and, pulling it downwards, detach it from the base. Then rotate the lamp holder 90 degrees counterclockwise, remove the old bulb and insert the replacement without touching the glass directly with bare hands. Finally, reassemble everything.

Posted on 25 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Interior Dome Light Bulbs for the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, we will go over the instructions that will allow you to disassemble and replace the bulbs in the interior dome light for the BMW 3 Series. Fir…
Replacing the Rear Brake Light Bulb
Replacing the Rear Brake Light Bulb
BMW Serie 3 (2005-2013 / E91, E90, E92) Open the trunk and remove the cover on the right side wall corresponding to the rear light where you need to replace the bulb (the procedure for the …
Replacement of the headlight bulb for the BMW Series 3.
Replacement of the headlight bulb for the BMW Series 3.
BMW Serie 3 (2005-2013 / E91, E90, E92) In this guide, we will explore the instructions on how to disassemble and replace the low beam bulb of the front headlight of the BMW Series 3. To ac…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos