Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Bulb and Dome Light of the BMW 3 Series

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Interior dome light bulb

This guide will show you how to remove and replace the bulb and dome light of the interior lights in the BMW 3 Series. First, get inside the vehicle and pry off the plastic cover of the dome light. Then, unscrew the screws of the dome light to detach and remove it, disconnecting the electrical connector of the bulbs as shown in the video. At this point, replace the bulbs with new ones, or replace the entire dome light assembly. Check its functionality and reattach the plastic cover.

Posted on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Light Bulb on the BMW 3 Series
How to Replace the Cabin Light Bulb on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will learn how to replace the cabin light bulb in the overhead console of a BMW 3 Series vehicle. To perform the bulb replacement, get ins…
Replacing the Interior Dome Light Bulbs for the BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Today, we will go over the instructions that will allow you to disassemble and replace the bulbs in the interior dome light for the BMW 3 Series. Fir…
How to replace the bulb of the ceiling light in the BMW 3 Series?
How to replace the bulb of the ceiling light in the BMW 3 Series?
BMW Serie 3 (2012-2019 / F30, F31) In this tutorial we can see how to replace the bulb of the ceiling light in the BMW 3 Series, an extremely simple and quick operation. First of all, …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos