Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front headlight ceiling light of the BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the plastic light cover of the front headlight of the BMW 3 Series. First of all, we open the hood of the car and start to disassemble and remove the front headlight, unscrewing all the fixing screws and disconnecting the electrical connector of the lights; then we gently detach the plastic cover or the light cover of the optical group, as shown in the video.

At this point, we install the new light cover, replacing the bulbs if necessary, finally reassembling the optical group and adjusting the headlight height.


Posted on 1 December 2024 by ScegliAuto


Related tutorials

Disassembly and replacement of the headlight assembly of the BMW 3 Series
Disassembly and replacement of the headlight assembly of the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today we will see the necessary instructions in order to disassemble and replace the front headlight assembly of the BMW 3 Series, in simple steps. F…
Disassembly and Replacement of the BMW 3 Series Headlight Assembly
Disassembly and Replacement of the BMW 3 Series Headlight Assembly
BMW Serie 3 (1998-2006 / E46) This guide briefly outlines the steps to disassemble and replace the front headlight assembly of the BMW 3 Series. First, open the hood of your car a…
Removing the Front Headlight from the BMW 3 Series
Removing the Front Headlight from the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide shows the steps to remove and replace the front headlight of the BMW 3 Series, following the instructions below. First, open the hoo…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos