Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 3
    4. : Removal of the headlight of the Bmw Serie 3

BMW Serie 3 - Video tutorial

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight
Operation: Removal of the headlight of the Bmw Serie 3

In this short guide, let's see the steps on how to disassemble and replace the front light of the BMW 3 Series, following the instructions below. First of all, we open the bonnet of our car and begin to detach the small plastic bulkhead that we find under the headlight; then use a torx screwdriver to unscrew the screws on the light, disconnecting the electrical connector of the bulbs to remove it, as shown in the video. Now let's replace, if necessary, the bulbs or the entire optical group; then we put everything back together, applying the reverse procedure!


Posted on 14 April 2023 by ScegliAuto

    Frequently Asked Questions

    • Serie 3 2005-2013 - What is the type of position light bulb on the BMW 3 Series E90? Read Answer
    • Serie 3 2012-2019 - Is it possible to remove the lens of the headlight of the BMW 3 series F31? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos