Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Lens on a BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Headlight

See other generations:
Video tutorial

Before you start, open the hood of your BMW 3 Series. First, unclip and remove the cover located under the headlight.

Next, remove the bolts securing the headlight, then pull it out and disconnect the electrical connector. After that, unclip and remove the headlight frame, then detach the clips holding the lens in place.

At this point, you can unclip and remove the headlight lens, completing the disassembly. To install the new lens, follow these steps in reverse, and you will have completed the replacement.


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Headlight Lens on the BMW 3 Series
BMW Serie 3 (2005-2013 / E92, E90, E91) Today's guide illustrates how to remove and replace the headlight lens on the BMW 3 Series, following these simple steps. First, open the hood and be…
How to Repair the Headlight Lens on the BMW 3 Series F30
How to Repair the Headlight Lens on the BMW 3 Series F30
BMW Serie 3 (2012-2019 / F31, F30) In today's video tutorial, you will learn how to repair the front headlight lens on the BMW 3 Series F30 by following these simple steps. First, open…
How to Clean and Polish Your Front Headlight to Like-New Condition
How to Clean and Polish Your Front Headlight to Like-New Condition
BMW Serie 3 (1998-2006 / E46) Open the hood. Protect the bodywork near the headlight with masking tape. Take a sheet of fine sandpaper, wet it, and start rubbing it on the headlig…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos