Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Lens on the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Headlight

Today's guide illustrates how to remove and replace the headlight lens on the BMW 3 Series, following these simple steps. First, open the hood and begin to remove the headlight from the vehicle by unscrewing the mounting screws and disconnecting the bulb connector; then use a small tool to detach and remove the lens from the headlight assembly, as shown in the video. At this point, install the new lens, securing it properly, and then reassemble the headlight assembly onto the body!

Updated on 3 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Headlight Bulb in a BMW 3
How to Replace the Headlight Bulb in a BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Replace the headlight bulbs in your BMW 3 Series if they are burned out or damaged. Let's go through the disassembly. Open the hood by pulling the le…
How to Replace the Headlight Bulb on a BMW 3 Series
How to Replace the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) Before you begin, open the hood of your BMW 3 Series. Start by removing the rear cover of the burnt-out bulb. Next, disconnect the electrical connect…
Removing the Front Headlight from the BMW 3 Series
Removing the Front Headlight from the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) This brief guide shows the steps to remove and replace the front headlight of the BMW 3 Series, following the instructions below. First, open the hoo…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos