Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Dome Light Bulbs for the BMW 3 Series

Model: BMW Serie 3 E91, E90, E92 - Years 2005-2013
Part: Interior dome light bulb

Today, we will go over the instructions that will allow you to disassemble and replace the bulbs in the interior dome light for the BMW 3 Series. First, get inside the vehicle and start by removing the dome light from the ceiling; to do this, gently pry on the sides, as shown in the video. At this point, remove the small bulb-type lights found underneath and replace them with new ones of the correct type and with the same base; reassemble or replace the dome light if necessary, following the video tutorial to the end!

Updated on 3 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacing the Bulb and Dome Light of the BMW 3 Series
Replacing the Bulb and Dome Light of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) This guide will show you how to remove and replace the bulb and dome light of the interior lights in the BMW 3 Series. First, get inside the vehicle …
Removing the Interior Light Fixture on the BMW 3 Series E90
Removing the Interior Light Fixture on the BMW 3 Series E90
BMW Serie 3 (2005-2013 / E91, E90, E92) In this video tutorial, you will see the steps to remove and replace the interior light fixture along with the bulbs on the BMW 3 Series E90. First, …
How to Replace the Cabin Light Bulb on the BMW 3 Series
How to Replace the Cabin Light Bulb on the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will learn how to replace the cabin light bulb in the overhead console of a BMW 3 Series vehicle. To perform the bulb replacement, get ins…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos