Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Headlight Bulb on BMW 3 Series F30 - F31

Model: BMW Serie 3 F30, F31 - Years 2012-2019
Part: Headlight bulb

In today's tutorial video, you will learn how to remove and replace the low beam and high beam bulbs in the front headlight of a BMW 3 Series F30 and F31. First, open the hood of your car and remove the plastic protective cap located above the headlight, as shown in the video. Next, disconnect the electrical connector to remove and replace the high beam bulb. To access the low beam bulb, you need to reach it from the wheel well; remove the plastic cover and proceed in the same manner as with the high beam bulb!

Updated on 4 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
Replacing Front Headlight Bulb on BMW 3 Series F30 - F31
BMW Serie 3 (2012-2019 / F30, F31) .. front headlight bulb on a BMW 3 Series F30 and F31. First, open the hood and remove the plastic cover protecting the bulbs. Next, disconnect the electrical.. …
Replacing the Headlight Bulb on a BMW 3 Series
Replacing the Headlight Bulb on a BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today, you will see in this brief and simple guide the steps to remove and replace the headlight bulb on a BMW 3 Series. First, open the hood of your…
How to replace the headlight bulb of the BMW 3 Series
How to replace the headlight bulb of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) The steps to replace the front right headlight bulb of the 2013 BMW 3 Series are simple and quick to follow independently, thanks to our short video …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos