Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the handbrake boot on the BMW 3 Series E90

Model: BMW Serie 3 E90, E92, E91 - Years 2005-2013

Let's find out in this short video how to remove and replace all the handbrake lever gaiter on the BMW 3 Series E90, but also on the E91 and E92. First of all we get on board the car and start by unhooking the headset and its base, leveraging the sides; then we extract the headphone outwards and unhook the part connected to the lever, as shown in the video. At this point we can replace, if necessary, the coating, and then reassemble everything on the lever; let's fix the cap with a clamp, and then hook the base of the cap on the central tunnel!

Posted on 10 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the handbrake lever cover on BMW 3 Series E90
How to remove the handbrake lever cover on BMW 3 Series E90
BMW Serie 3 (2005-2013 / E90, E92, E91) Let's see in this video how to remove the handbrake lever cover on a BMW 3 Series E90, following these simple steps. First of all, let's get inside t…
How to adjust the handbrake of the BMW 3 Series?
How to adjust the handbrake of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E90, E92, E91) To be able to adjust the handbrake of the BMW 3 Series, you have to lift the leather boot that surrounds the handbrake lever, so that you can access …
How do you adjust the handbrake of the BMW 3 Series?
How do you adjust the handbrake of the BMW 3 Series?
BMW Serie 3 (2005-2013 / E90, E92, E91) To adjust the handbrake of the BMW 3 Series, you need to lift the car with a jack so that the left rear wheel is not in contact with the ground. Once…

How to Replace the Front Headlamp Bulbs on a Dacia Sandero

Open the bonnet by pulling the lever located at the bottom left of the dashboard, and secure it with the prop rod. Locate the inspection cap of the headlamp (at the rear of the headlamp) and remove it. After removing the caps, you will find the bulbs with metal clips; pull out the bulb holder from the headlamp and extract the damaged bulbs using a screwdriver. Fit the new bulbs (ensuring they are the correct type and size) and insert the bulb holder back into the headlamp housing. Reassemble all previously removed parts.

Watch the video!


by ScegliAuto

More videos