Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on a BMW 3 Series?

Model: BMW Serie 3 E92, E91, E90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Parking brake

See other generations:
Video tutorial

To adjust the handbrake on a BMW 3 Series, lift the vehicle with a jack so that the left rear wheel is off the ground. Once the wheel is lifted, remove the nuts that secure it to the hub to access the underlying drum.

By removing the drum screws, you can locate the washer between the handbrake shoes: this washer can be tightened or loosened to adjust the handbrake's firmness. Repeat the same procedure by removing the leather boot covering the handbrake and adjusting the bolt underneath.


Updated on 27 August 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2005-2013 / E92, E91, E90) To adjust the handbrake of the BMW 3 Series, you need to lift the car with a jack or a lift, so that the wheels are not in contact with the ground: o…
BMW Serie 3 (1998-2006 / E46) In this guide for all of you who own a BMW 3 Series E46, you will find how to locate the fuse box containing all the fuses of the car in a few simple…
BMW Serie 3 (2005-2013 / E92, E91, E90) To remove the shift knob from a BMW 3 Series, first ensure the vehicle is in neutral and the parking brake is engaged. Press and hold the rear button…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Where is the battery located on the Aprilia Scarabeo 250ie scooter?

This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure.

Watch the video!


by ScegliAuto

More videos