|
Do it yourself
| |||
| ||||
How do you adjust the handbrake of the BMW 3 Series?
Model: BMW Serie 3
E92, E91, E90
- Years:
2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Video tutorial
To adjust the handbrake of the BMW 3 Series, you need to lift the car with a jack or a lift, so that the wheels are not in contact with the ground: once the left rear wheel has been removed by loosening the bolts, you can locate the corresponding disc. In its central part, you can identify some bolts that need to be loosened or tightened to adjust the intensity of the handbrake: by tightening the bolt, you can reduce the handbrake travel and make it firmer; conversely, by loosening the bolt, you will increase the travel and make the lever lighter.
Posted on 9 March 2025 by ScegliAuto
Related tutorials
BMW Serie 3
(2005-2013 /
E92, E91, E90)
To adjust the handbrake on a BMW 3 Series, lift the vehicle with a jack so that the left rear wheel is off the ground. Once the wheel is lifted, remo…
BMW Serie 3
(1990-2001 /
E36)
If you need to adjust the handbrake tension on this model from the German manufacturer, you can find the information and procedures to follow in the …
BMW Serie 3
(2012-2019 /
F31, F30)
To fix the handbrake on a BMW 3 Series (if it does not stop even when pulled all the way), start by putting the car on a lift and raising it, or on a…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.
Other guides you may be interested in
|
Where is the battery located on the Aprilia Scarabeo 250ie scooter?
This video shows where the battery is located on the Aprilia Scarabeo 250ie scooter and how to proceed if you need to replace it. As shown, it is located beneath the seat. To access and replace it, first open the seat, then remove the plastic cover by unscrewing the relevant screws with a cross-head screwdriver. Next, disconnect both terminals, starting with the negative, remove the battery from its housing, and install the new replacement following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.016
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy - About us VAT number: IT01247470535 |