Do it yourself
Frequently asked questions about cars and motorcycles

How to Adjust the Handbrake on the BMW 3 Series

Model: BMW Serie 3 E36 - Years 1990-2001
Part: Parking brake

If you need to adjust the handbrake tension on this model from the German manufacturer, you can find the information and procedures to follow in the description below and in the video. First, access the driver's seat and remove the leather cover at the base of the handbrake. Underneath, you will find the handbrake cables, which have a nut at the end that can be adjusted with a 12 mm wrench. Proceed to tighten or loosen it as needed. Then, reposition the cover, and you are done.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (2005-2013 / E91, E90, E92) To adjust the handbrake on a BMW 3 Series, lift the leather cover that surrounds the handbrake lever to access the components underneath. Here, you w…
BMW Serie 3 (2005-2013 / E91, E90, E92) To adjust the parking brake on your vehicle, locate the cable's stop mechanism. To access it, remove the rear wheels where the parking brake is used.…
BMW Serie 3 (1998-2006 / E46) In this video, see how to adjust the parking brake on a BMW 3 Series. Use a screwdriver to remove the cover from the parking brake lever next to the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos