Do it yourself
Frequently asked questions about cars and motorcycles

Tips for Seat Adjustment Buttons

Model: BMW Serie 5 E39 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Part: Seat

See other generations:
Video tutorial

To perform this operation, remove the entire block of the two buttons using a lever to pop out the cover. Once you have it in hand, you can pull out the buttons.

After doing this, you will find the double switch for the seats, which has two snap-in screws that come out by pulling them toward you. Once removed from the housing, disconnect the connector. The teeth need to be removed, but be careful not to apply too much pressure to avoid deforming the plastic.

The buttons are not individual as it may seem; they operate in pairs.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

BMW Serie 5 (1995-2003 / E39) This video shows some tips on how to use the sunroof in your car. If you can't understand how to operate the sunroof using its control button, this v…
BMW Serie 5 (1988-1995 / E34) Today, we will show you a not-so-simple operation, which is the removal of the rear seats on a BMW E34. First, to extract the rear seat cushion from …
BMW Serie 5 (1995-2003 / E39) Let's remove the rear seats of a BMW 3 Series. Remove the rear seat bottom (lift the seat with your hands) until it completely detaches from the floo…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos