Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front bumper grille of the BMW 3 Series - M3

Model: BMW Serie 3 G20 - Years 2019-2026
Part: Grille

Let's find out in this short guide how to remove and replace the front bumper grille of the BMW 3 Series, in the M3 version. First we open the bonnet of our car and start by removing the plastic cover that we find above the front bumper, removing the plastic clips; then we use a thin plastic lever to gently unclip our front grille, until it is completely removed, as shown in the video. Now let's go to install the new front bumper grille, following the video tutorial to the end for reassembly!

Posted on 12 March 2022 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front bumper grille of the BMW 3 Series
Replacement of the front bumper grille of the BMW 3 Series
BMW Serie 3 (2019-2026 / G20) Today's instructions will show us how to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open the hood and start remov…
Assembly of the front bumper grille of the BMW 3 Series
Assembly of the front bumper grille of the BMW 3 Series
BMW Serie 3 (2012-2019 / F30, F31) Today we will see, in this video tutorial, how to remove and replace the front bumper grille of the BMW 3 Series, but also of the 5 Series, in simple…
Replacement of the front bumper grilles of the BMW 3 Series
Replacement of the front bumper grilles of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this guide, we will see the main steps that will allow us to disassemble and replace the front bumper grille of the BMW 3 Series. First, we open t…

Other guides you may be interested in

How to Remove the Fuel Pump from a Hyundai IX35

How to remove the fuel pump from a Hyundai IX35. First, disconnect the battery cables, then remove the rear seat from the car. You will find various wiring and a metal piece with screws; that is what you need to dismantle. Undo the screws of the metal cap and remove it. Wrap the entire perimeter of the metal sheet with absorbent paper or cloth, then, with a screwdriver, undo the large bolt around the pump (if present for the model). Disconnect the power connectors and the liquid circulation pipes. Finally, extract the floating fuel pump. To perform the assembly, work in reverse order.

Watch the video!


by ScegliAuto

More videos