Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Air Conditioning Control Panel

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Air conditioning

Before proceeding with disassembly, shift the gear lever backward to gain more working space. Replacing the air conditioning control panel is very simple; this device is secured to the center console with metal spring tabs located on the sides: just leverage the side of the panel with a small flathead screwdriver to compress the spring and allow for removal. Once removed from its location, disconnect the connectors (one has a bayonet lock, while the other has the classic push tab). Then connect the connectors to the new panel, perform a functionality check, and snap it into place.

Updated on 10 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing Air Conditioning Control Buttons
Instructions for Replacing Air Conditioning Control Buttons
BMW Serie 5 (1995-2003 / E39) Replacing the air conditioning control buttons is extremely simple and can be done directly in the vehicle, but for convenience, it is suggested to r…
Disassembly of the air conditioning compressor of the BMW 5 Series
Disassembly of the air conditioning compressor of the BMW 5 Series
BMW Serie 5 (2003-2010 / E60, E61) Today's instructions will show us how to disassemble and replace the air conditioning compressor of the BMW 5 Series. First, we open the hood of the …
Tips for Using the Air Conditioning
Tips for Using the Air Conditioning
BMW Serie 5 (1995-2003 / E39) This brief tutorial provides tips for the proper and effective use of the air conditioning system in a BMW 5 Series. First, it is recommended to use …

How to Replace the Thermostat on a Fiat Punto 2 Series 8v

When replacing the thermostat, it is advisable to drain the coolant system completely. The thermostat is located just above the gearbox, directly under the ignition coils. To facilitate the replacement, disconnect the intake duct hose and remove the coil pack. At this point, disconnect the connector from the thermostat and proceed to remove the corresponding fixing pins to replace it with the new one, ensuring to use a new gasket.

Watch the video!


by ScegliAuto

More videos