Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Fender on the BMW 3 Series E46

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006

See other generations:
Video tutorial

In this video, you will see the procedure to remove and replace the front fender on the BMW 3 Series E46 in simple steps. First, lift the vehicle and remove the front wheel.

Next, start by removing the inner fender liner by unscrewing all the mounting screws. At this point, remove all the screws located at the top of the fender using a socket wrench.

Open the front door to detach the fender and remove it, as shown in the video. Finally, apply the reverse procedure for reinstallation!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Replacing the Front Axle Boot on the BMW 3 Series E46
Replacing the Front Axle Boot on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) Today, you will see in this video tutorial how to remove and replace the front axle boot on the BMW 3 Series E46, following the instructions below. F…
How to Remove the Lock Cylinder on a BMW 3 Series E46
How to Remove the Lock Cylinder on a BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this short and simple video, we will see the steps to remove and possibly replace the door lock on a BMW 3 Series E46. First, open the front door …
How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos