Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Starter Motor on the BMW 3 Series E46

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Starter motor

In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, locate the starter motor; then, loosen the nut on the power cable terminal using a 13 mm wrench, as shown in the video. Next, disconnect the clips found on the rear; now, remove the arm located near the transmission, as indicated, to access the bolts of the starter motor, removing and replacing it!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

BMW Serie 3 (1998-2006 / E46) In today's tutorial video, you will see the instructions to remove and replace the starter motor on the BMW 3 Series E46 325 Xi in simple and quick s…
BMW Serie 3 (1998-2006 / E46) .. Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First,.. …
BMW Serie 3 (1998-2006 / E46) Let's replace the starter motor on a BMW 3 Series. Raise the hood and secure it. Remove the starter motor covers, disconnect the battery terminals an…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos