Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Starter Motor on the BMW 3 Series E46 320D

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Starter motor

See other generations:
This video is currently unavailable

Today, you will learn how to remove the starter motor on the BMW 3 Series E46 320D by following the instructions below. First, open the hood and remove the upper engine cover; then, take off the panel located under the wiper arms.

At this point, remove the screws securing the intake ducts, disconnecting the hose by unscrewing the clamp screws; you will find the starter motor at the bottom, where you will unscrew the screws to remove it. Finally, disconnect the electrical connector to take it out and replace it with the new one!


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Disassembly of the starter motor of the BMW 3 Series 320D.
Disassembly of the starter motor of the BMW 3 Series 320D.
BMW Serie 3 (1998-2006 / E46) Today we will discover the main instructions that will allow us to disassemble and replace the starter motor of the BMW 3 Series 320D. First of all, …
How to Remove the Starter Motor on the BMW 3 Series E46
How to Remove the Starter Motor on the BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to remove and replace the starter motor on the BMW 3 Series E46, following the instructions below. First, …
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
How to Remove the Coolant Hose on BMW 3 Series E46-E90 320d
BMW Serie 3 (1998-2006 / E46) Today, you will learn how to remove and replace the coolant hose on a BMW 3 Series E46, as well as on the 3 Series 320d E90. First, open the hood of …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos