Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Starter Motor on a BMW 320 E90/E91/E92

Model: BMW Serie 3 E92, E90, E91 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Starter motor

See other generations:
Video tutorial

To perform this operation, the first step is to disconnect the negative terminal of the battery located in the trunk on the right side. Raise the vehicle from the front right side to access the starter motor.

Remove the screws securing the lower transmission cover and take off the heat shield to access the component. Now disconnect the electrical connector and the power cable, being careful not to bend the wiring.

You will find 2 bolts securing the starter motor to the engine block (transmission side). Do not remove the starter motor without support: it weighs about 4 to 7 lbs. You can find the new starter motor on eBay with the code 276440163517 for $68.99, with free shipping.

Install the new starter motor, torque the bolts; reinstall the heat shield, lower cover, and wheel. Lower the car. Reconnect the negative terminal.


Posted on 8 June 2026 by ScegliAuto


Related tutorials

BMW Serie 3 (2005-2013 / E92, E90, E91) This video shows how to access the fuse box in a BMW 3 Series 320. The procedure is common to BMW models E90, E91, E92, and E93. Ensure the vehicle i…
BMW Serie 3 (2005-2013 / E92, E90, E91) In today's tutorial video, you will see the main instructions for disassembling and replacing the thermostat on a BMW 3 Series E90-E91-E92. First, op…
BMW Serie 3 (2005-2013 / E92, E90, E91) To reset the oil change service light on a BMW 320 Series E90, follow this procedure: open the driver’s door and access the driver’s seat. Press the …

Other guides you may be interested in

How to open the boot if it is stuck on a Mercedes B-Class?

On the Mercedes B-Class, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In this case, perform the emergency opening by following the simple procedure shown in this tutorial. First, unlock the locks with the remote control, then open the rear doors and, by operating the indicated lever, lower the backrest of the seat. Next, go inside the boot, locate the indicated gap, and manually unlock the lock using a small screwdriver.

Watch the video!


by ScegliAuto

More videos